Cateye V3 - Manuel d'instructions télécharger pdf (Page 9)

ENG-17

ENG

ENG-16

SSE

M1/+

SSE

M2/-

SSE

Starting/Stopping the measurement

Initially, the unit starts or stops measurement automatically in sync

with the bicycle motion. This is called auto-mode function.

“km/h” or “mph” flashes during measurement.

The total distance, maximum speed, maximum heart rate, and maximum

cadence are updated independently of stating/stopping measurement.

Auto-mode function

When the auto-mode is turned on ( lights up), the unit detects

the wheel spinning, and starts/stops measurement automatically.

When the auto-mode is turned off ( lights off), the unit starts/

stops measurement by using the SSE button.

* For on/off of the auto-mode, see the menu screen “Setting the auto-

mode” (page 32).

* When the transmission is stopped and Sensor signal icons

, ,

are off (page 15), the main timer may not start due to speed

signal not responding.

Press the M1/+ or M2/- button to turn on the sensor signal icons

, , .

Backlight

Pressing the LT button illuminates the displays for about 3 seconds.

* Pressing any button while backlight is still on extends the illumination

for another 3 seconds.

Resetting the measurement data

To reset the measurement data (TM, DST, Lap Time, C.D. DST, etc)

and the lap data, simultaneously press the SSE button and the

M1/+ or M2/- button in the measurement screen.

* Resetting the measurement data saves the data automatically on a

file. (page 24)

* The screen will freeze for about 2 seconds after resetting; however,

all measurements are operating normally, including the elapsed time.

* The countdown setting (C.D.DST→) is returned to the manu set

value you set.

* Cannot reset for 5 seconds after pressing the LAP button.

Power-saving function

When the computer does not receive any data for 5 minutes, it will

enter the power-saving mode, in which only the date/clock is displayed.

By pressing any buttons except the AC recovers from the power-

saving mode, and the measurement screen appears. You must press

a button when the computer is in power saving mode before it will

start to measure any data.

Power-saving mode

AT icon

(or)

(Simulta-

neously press)

(Simulta-

neously press)

Average speed

Average heart

rate

Average cadence

Maximum

speed

Maximum

heart rate

Maximum cadence

Current speed

Heart rate

Cadence

M1/+

Date

Clock

Total time

Total distance

Calorie

Consumption

Elapsed time Trip distance

Countdown

distance

Lap

number

Lap timer

Average

lap

speed

Lap distance

M2/-

(2 Sec.)

M2/-

Basic operation of the computer

Functions on the measurement screen

The measurement screen displays 4 different types of data, which are switched by press-

ing the M1/+ and M2/- buttons.

The display data are as follows.

Upper display data

Displays the data related to the speed.

Middle display data

Displays the data related to the heart rate.

Displays the data related to the cadence.

Lower display data

Displays the other data.

Real time lap data (on-going lap data)

* Pressing and holding the M2/- button while

displaying the lap timer switches the lap timer to

the lap distance.

Pressing it again returns to the lap timer.

* Upper and Middle display data are switched in sync together.

Switch using the M2/- button

Switch using the M1/+ button

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Commentaires sur ces manuels

Pas de commentaire

Cateye V3 - Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour vélos Cateye V3 -